Collapsible push rod tube for all waterboxer Vanagon 83-91 Do you have an oil leak coming from under your push rod tube covers? Most likely it is a pin hole in one of your old push rod tubes. Or you could have a bad lifter that needs to be replaced but you don’t want to pull the head on that side. These collapsible push rod tubes are the answer. Developed by desert racers to allow quick replacement of broken and leaking push rod tubes, you can replace your old one in a matter of minutes. These are aftermarket, but made in the USA. They are thicker and beefier than the OE style so you can remove your push rod tube covers under the engine and run without them. Comes with new seals!
Price is per tube and your engine has 8 total. I sell these as a set of 8 which you can buy here and save a little money. Only use this if you need less than 8.
Here is a link to a video about the tubes below:
Oversized Main Bearing Set for 83-85 1.9L Vanagon .25mm on the crank std on the case
$125.00
